ETC SmartFade ML v3.0.1 - Manual (Page 25)

2
Setup 17
C h a p t e r 2
Setup
The default setup of SmartFade ML allows you to run 48 dimmer channels straight out of
the box. Moving lights, scrollers and LEDs always have to be patched, since they require a
specific personality corresponding to each type. There are other user Settings for displays
and language. These are described in this chapter.
This chapter contains the following sections:
• DMX Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
• Clear/Set Patch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
• Patch Dimmers (INT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
• Patch Independents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
• Patch Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
• Console Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
• MIDI Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
• Custom Moving Light Personalities . . . . . . . . . . . . . . . . . . . .32