ETC SmartFade ML v3.0.1 - Manual (Page 35)

2
Setup 27
Memory Rubberband
When On, device parameters (non intensity channels) will follow the fader up and back.
When Off, the parameters will move to their new positions as you take up a fader and then
remain there when the fader is taken down. This is set in the Setup menu.
Menu>Setup>[Memory Rubberband]
DMX Out
See “DMX Out Speed” on page 18.
MIDI Settings
See “MIDI Settings” on page 27.
Language
You can choose language for the menus from the Setup menu.
Menu>Setup>Language>[English]
Current choices are
• English
• Français
• Deutsch
• Español
• Italiano
The console will continue to boot with the last selected language until it is changed.
Displays
Display settings are done from the Setup menu.
Menu>Setup>[Displays]
Menu choice Console Feedback
BUTTON Wheel 1 Button intensities
SCREEN Wheel 2 LCD intensities
CONTRAST Wheel 3 LCD Contrast