ETC SmartFade ML v3.0.1 - Manual (Page 40)

32 SmartFade ML v3.0.1 User Manual
Custom Moving Light Personalities
Custom Moving Light Personalities
SmartFade ML includes a large number of moving light personalities. If, for any reason they
do not meet your needs or you have a device that isn’t included, it is also possible to build
up to 20 user personalities that are stored with the show. The personalities can be built on-
line, and this is probably the best way to ensure that they are working properly with the
intended device. They are patched from the Patch Wizard as any other personality, and
appear before the factory personalities. If they need to be edited after being patched - they
must be repatched for the changes to be updated.
Open the Personality Editor
Step 1: Select the menu Patch Personalities
Menu>Patch>Patch Devices> [User Personalities]
Use MORE to select Universe (U1/U2)
Use the encoder 2 to set the DMX address for the connected device to be able
to test the personality live.
Use the right wheel to select which personality to edit/create (1-20).
Step 2: Press (MENU) to confirm. You will have a choice of editing an existing
personality or Erase and make a new one. Make your selection with encoder 3.
Step 3: Press (MENU) to confirm. This is the programming interface for creating a
personality.
Step 4: You are ready to edit/create the selected personality. There are two methods -
live (with faders) and blind (in the display only). The easiest method is live with
the device connected.