ETC SmartFade ML v3.0.1 - Manual (Page 50)

42 SmartFade ML v3.0.1 User Manual
Devices
SmartFade ML is specially designed to handle devices, like moving lights, in a very simple
and straightforward way.
Device intensities and parameters can be set manually with the faders and/or with the LCD
parameter menus. See “Intensity Channels” on page 40.
Working with devices like moving lights, scrollers and LEDs often requires more
preparation than dimmers. Both programming and playback will be easier if you prepare
Palettes and Groups for quickly selecting and adjusting devices. See “Palettes” on
page 16. See “Groups” on page 16.
Device Times
There are two default time settings that will affect how devices are controlled. See “Default
Device Times” on page 68.
Know your device
If you are going to control a device, make sure you know how it works. Read the manual
for the device, and check what operating mode it is set to work in. Make sure this operating
mode corresponds to the personality in the Device Patch of SmartFade ML. See “Patch
Devices” on page 23.
DEVICE
INT
PARAM
1
PARAM
2