ETC SmartFade ML v3.0.1 - Manual (Page 58)

50 SmartFade ML v3.0.1 User Manual
Highlight Mode
Highlight is a mode designed for when you are adjusting a group of devices one by one. It
will bring the selected devices to a dimmed value and allow you to select one at a time at
full. All devices that are not selected are set temporarily to zero and cannot be selected.
Fetch Parameters from a Memory
If you want to copy the parameters of a device from a specific memory to reuse a color,
position or beam setting, use Fetch.
Action Console Feedback
1. Select devices ... Selected device buttons are lit to full (Device
Select mode has to be active).
2. Activate Highlight mode This button lights up.
3. Select a device within
the first selection
... This button lights up, and the device is set to
full. The other devices are set to zero. Adjust
parameters, and select the next device. Only
one device can be selected at a time. Press
HIGHLIGHT to exit the mode.
Action Console Feedback
1. Select devices ... Selected device buttons are lit to full (Device
Select mode has to be active).
2. Activate a palette mode This button lights up. All select buttons with a
recorded palette light up at full
3. Select any memory
bump
... As soon as a select button is pressed, the
parameters for the selected type are copied
from this memory. The console will automati-
cally return to Device Select mode.
1 24
HIGH
LIGHT
1 24
1 24
FOCUS COLOR BEAM
1 24