The user interface, Cem3 face panel, Navigation – ETC CEM3 v1.5.1 User Manual

Page 12: Scroll wheel, Keypad, Display menus, Cem3 face panel navigation

Advertising
background image

6

CEM3 User Manual

The User Interface

This section will clarify the physical features of the hardware interface and the general

functionality with the software.

CEM3 face panel

These are the various components in the hardware interface. Familiarize yourself with

these terms as they are used throughout this manual.

Navigation

Scroll Wheel

Use the scroll wheel and up/down arrows to move the selection cursor on any menu screen

until the desired item is highlighted. You can also tap the top or bottom of the scroll wheel

to move the display cursor up or down.

The scroll wheel also lets you scroll through number fields (such as circuit number) or

through the available options for a selected item (such as Module Type).

The center button of the scroll wheel functions as [Enter]. Press [Enter] to select the

highlighted item on the display window or to commit entered data.

Keypad

Use keypad to enter values for any value fields in the display window. When setting levels

you can select individual dimmers or ranges of dimmers using the [and] and [thru] buttons.

Both the center button of the scroll wheel and the bottom right keypad button function as

[Enter]. Press [Enter] to select the highlighted item on the display window or to commit

entered data.

The menu buttons ([Test], [About], [Setup]) and the [Back] button are integral in navigating

the menu structure.

Display Menus

The navigation buttons are used to navigate the menu structure.

Press the menu buttons ([Test], [About], [Setup]) to access features within that menu type

(see

Menu Structure, page 17

).

Use the scroll wheel to navigate through menu items in the display window, using [Enter]

to select desired items, entry fields, or access submenus.

Press [Back] to return to the previous screen on any menu.

Eject - Pull
both levers
forward from
the top edge.
Grasp and pull
to remove
control module
(power down
the rack before
removing).

Eject

LEDs identify current states of:

Power

DMX Ports Network

Panic

Reset

Net3

Ethernet

USB

Load Software and

configurations

Display window Navigation

Buttons

Scroll
wheel

Keypad

Advertising