ETC CEM3 v1.5.1 - Manual (Page 40)

34 CEM3 User Manual
Loading CEM3 Software
You can upgrade your CEM3 software using the same methods as loading configurations
(see above). CEM3 software can be obtained by contacting ETC Technical Services (see
page 3 ).
From USB media
Step 1: Back up the rack configuration using the steps outlined in Saving Configurations,
page 33 .
Step 2: Navigate to [Setup]>File Operations>Upgrade from USB. The “software
upgrade” screen will appear.
Step 3: Use the scroll wheel to navigate the file structure to the desired configuration file
(CEM3 software file names will end in “.bld”) and press [Enter]. A confirmation
screen will appear.
Step 4: Select “Yes” to continue. Select “No” abort the upgrade. The software upgrade
process will take several minutes.
From a computer
To load a configuration from a computer on the system network, see the appendix Using
the CEM3 Web Interface, page 49 .
You can also use ETC’s Updaterator software to upgrade your CEM3. Updaterator can be
downloaded from ETC’s website www.etcconnect.com .
To an FTP server
To load software from an FTP server on the system network, see Working with an FTP
Server, page 39 .