ETC CEM3 v1.5.1 - Manual (Page 25)

2
System Reference 19
UI Preferences
Allows you to alter various settings regarding the user interface.
Backlight Mode
This setting affects the backlight behind the display window. Choices are “On,” “Off,”
and “Auto”. Auto will illuminate the window after a button press or boot up for the time
specified in Backlight Time. Default is “Auto.”
Backlight Time
Appears only when Backlight Mode is set to “Auto”. Specify the time in minutes and
seconds (between 0:10 and 9:59) for the backlight to stay lit after a reboot or button press.
Default is 3:00.
Contrast
Adjusts the contrast of the display window. This can also be done from the home screen by
holding the back arrow and using the scroll wheel.
Language
Alters the display language for the display window. Default is English.
Temp Locale
Alters the units used for the temperature display, Celsius (C) or Fahrenheit (F). Default is
“F”.
sACN
Determines the method of displaying sACN addresses: Universe/Channel (Uni/Ch) or
absolute address (Abs). Default is Uni/Ch.
Dimmer Property Definitions
Each dimmer has specific properties that dictate how the dimmer functions and how CEM3 will
control it. These properties are accessible and editable for any dimmer by navigating to
[Setup]>Dimmers.
Below is a list of the various dimmer properties in the order they appear on the display:
Dimmer Property Definition
Cct:
Circuit Number. A user-assigned number for a unique circuit
within a “space.” Typically the circuit number matches the labelling
at the corresponding power outlet.
Lug:
Describes the physical location of a circuit in a rack. This field
cannot be altered. Some module types may take up multiple lug
positions in the rack. In this case, not all module “slots” will have a
circuit number
Lvl:
The current level (0-100%) of the HTP source in control of the
dimmer.
Module:
The type of module controlling the circuit. Defines module density,
ratings, and features to ensure proper function of the connected
equipment and power devices in the module.