EZWatch Pro 3.0 User Manual
Page 43
43
and/or remote PC. You can change the display position and color of location/date/time by
working on the column of Color & Position. Clicking “Image” icon will allow user to
impose a self-defined image on the videos. Default image is
. The watermark must be
less 64*64 pixels and Bmp file.
Note: (for Witness DX Pro user only)
1.If user enable MPEG1 stream, as shown on Fig.6-4, it means you want to execute hardware
compression then only date, time and watermark could not be shown on remote PC. Neither
Local DVR Server nor remote PC can show date, time and watermark on monitor.
2.If user disables MPEG1 stream (software compression), date/time/watermark could be sent
to remote PC and saved on video clip (But you need to enable Remote and Video clip).
z NetCom module
This will allow you to control Speed Dome cameras, P/T/Z cameras and digital I/O device. If
Speed Dome or PTZ camera or digital I/O device is applied, please enable this item. However,
their ID should set correctly. Otherwise, you cannot use Speed Dome or PTZ camera function.
For details, please consult the “The NetCom System Operation Manual”. (Optional)
z Audio (Output to speaker)
When this option is checked, the sound of the camera’s surrounding will be played on your
local speakers. This function is designed for monitoring sound in your camera’s area. For
Witness DX Pro user, please refer Chapter 5-2-2.
Note: If this option is not selected but you have a microphone on the camera it can still record
sound, just not play it to speakers right away.
z Copy Use this function to copy the parameters of another camera to this one or all.
z Exit Exit “Camera Configuration”.
Note:
1. The output of microphone must be over 2 Vp-p.
2. Please do not use an AC97 sound card for audio recording. To obtain a higher quality
for recording audio, please adjust recording sampling rate to optimal.
3.If user enables Output to Speaker on multiple cameras at the same time, audio output
will make noise. (only for Witness DX Pro users).