14. setting up notification – EZWatch Pro 3.0 User Manual
Page 68
68
6-14. Setting Up Notification
Click
and select the “Notification” tab (Shown as Fig. 6-8) and then click
to access the
following functions:
• Auto-Launch to remote PC Once motion is detected; the live video can be transferred to a remote
site via modem or Internet.
Link time: This is the time period that the computer will remain connected with the remote site.
To set the Auto-launch function, use the following steps:
1. Enter the phone number or IP address or DNS into the Number/IP box.
2. Specify a Link time in the number box.
3. Enter the TCP/IP port number; the number of “Port” must be matched between FreeView Pro
and Witness XP software. FreeView Pro default is 1501.
4. Select transmission camera(s) when it is triggered.
Click the Add button. Your information will be saved and shown in the number dialog box.
6. Repeat step 1 to step 5 to add another PC for auto-launch.