EZWatch Pro 3.0 - Manual (Page 99)

99
9. Using PDAView Pro (For Pocket PC PDA only)
PDAView Pro is a remote view application for Pocket PC device. It can run on PDA using
Pocket PC 2002 or 2003 operating system. These sections discuss PDAView Pro and how to use
it. The main purpose of PDAView Pro is to provide a way to connect to the Local DVR Server
(where you are running Witness XP) to monitor the cameras there if you happen to be far away
from it. With PDA you can begin to use automatic remote video security and surveillance via the
Wireless LAN or Internet.
9-1. The PDAView Installation
You may install the PDAView Pro program into the PDA by following the steps below:
Step 1. Plug your PDA via USB or Com port to a PC installed with Microsoft ActiveSync.
Step 2. Run Microsoft ActiveSync in the connected PC and make sure both the PDA and PC are
synchronized.
Step 3. Insert our CD into the CD-ROM drive of the PC and run “Instal.exe“ in the CD-ROM
root directory.
Step 4. In the setup dialog box select “PDAView Pro” and click Next.
Step 5. Click Brows if you wish to specify another destination directory; otherwise click Next
and follow the rest of the instruction to complete the installation.