EZWatch Pro 3.0 - Manual (Page 57)

57
Step 3. After completing the steps above, click “Add” to finish setup. Click “Exit” to leave
“Set up privileges”
Note: Please remember removing the default supervisor “root”, otherwise there will be two
supervisors.
z Set privilege for additional users
Step 1. Enter username.
Step 2. Enter user password, Enter password again for confirmation.
Step 3. Select privileges.
Step 4. Select cameras and authorize use by clicking on “Authorize”.
Step 5. After completing the above steps, click “Add” to finish user setup.
Step 6. To add more users, repeat steps 1-5.
Note: 1. If the supervisor’s password or username is lost, Witness XP must be reinstalled.
All previous settings will be lost. However, saved videos will not be erased.
2. Passwords must consist of 0-9 and a-z or A-Z.
3. The password is case sensitive. (PaSsWoRd is not the same as password)
z Remove/modify user privileges.
Step 1. Select the user in the username list.
Step 2. Click “Delete” to remove user or double-click on the username to modify user
privileges.