EZWatch Pro 3.0 User Manual
Page 67
67
6-13. How to set notification and trigger devices when alarm
Click
and select the “Recording” tab and you will see the following window Fig. 6-7.
Follow the instructions below:
Fig. 6-7 Fig. 6-8
Step 1. Select the appropriate camera.
Step 2. Select “Enable recording schedule”. Select “Enable audio recording” if you also
wish to record audio.
Step 3. Click the
icon to set up the recording schedule. See details at Chapter 6-7.
Step 4. Select the method of motion detection (“Software detection” or “Hardware detection”)
for recording, notification and trigger devices.
Step 5. Select the “Notification” tab. The window Fig. 6-8 will appear.
See details on how to set up Notification in Chapter 6-13 & Chapter 6-14.
Step 6. Repeat Steps 1–5 for other cameras if desired.
Note: When you set schedules of sequential recording and motion detection recording, please do
not schedule overlapping periods. Overlapped periods will be executed improperly. Ex.
Sequential recording is scheduled between 3:00 and 5:00 and motion detection recording is
from 4:00 to 7:00. Because of overlap, Witness XP will only execute sequential recording
from 4:00 to 5:00 and motion detention from 5:01 to 7:00.