EZWatch Pro 3.0 - Manual (Page 44)

44
6-2. Video and Audio Recording Installation
Click on the “Recording” tab, and you should see the following window. Follow the instructions
below to complete setup.
Fig. 6-3 Fig. 6-4 (for Witness DX Pro only)
z Video and Audio Settings
Select “Enable recording schedule” to set up a schedule. If you select “Enable audio
recording” audio will be recorded when the video starts recording. Click
to set recording
schedule. For details, please consult Chap. 6-7.
z After finishing with “Set up schedule”, recorded video filenames will be saved under the
starting time. The time length in the “File saving” box decides how long each video file will be.
For example, with the settings in the window above, 4 hours of recording will generate 16 video
files.
z Recording rate: If you would not like to use Preview speed for recording, you also can select
a recording rate for each camera. If the preview speed is lower than the recording rate the
system will record at the preview speed.
If user disables MPEG1 stream, it means software compression will be used.