EZWatch Pro 3.0 - Manual (Page 95)

95
7-9. Remote control
FreeView Pro allows remote client to control the Witness XP DVR server via EzRClient program
through Internet or Intranet. The Remote client can set up the Witness XP server from remote site
such as operating at the local. You can control the Witness XP DVR server by through the
following steps:
Step 1. Connect to the Internet or Intranet with your remote client computer and Witness XP
DVR server first.
Step 2. On Witness XP Server site Click on the “Start” button, choosing “Programs”. Move
onto “Witness AS (ASE/DX/HS/U) Pro” and click on Remote Server- EzRServer and
you should see below window (Fig. 7-6). Enter “Password” and save it.
Step 3. On FreeView Pro Client site Click on the bottom Tool bar of FreeView Pro and
you should see below window. (Fig. 7-7)
Fig. 7-6 Fig. 7-7
Step 4. Enter your “IP Address” and “Password”. The administrator of Local DVR Server
must create a specified user account in Local EzRServer program before connecting.
Without the correct password, you cannot log in.
Step 5. The setting number of “TCP/IP Port” must be matched between both sites. EzRServer
port default is 1901.
Step 6. Press “Connect” button to complete the process. FreeView Pro will connect you to the
Local DVR Server.