HYDAC HMG 3000 - Manual (Page 33)

HMG 3000 Page 33
Edition 11/2007 - V02 R01-S02 Stock no.: 669712
6.1.5 Administer settings
(save, load, ...)
All of the measurement channel settings
made by you in the HMG for the last
measurement can be saved and then
reloaded later on for the purpose of
periodically repeating the same
measurement, for example.
You can also delete individual stored
settings or restore the factory settings.
Select Administer settings (save, load, ...),
press OK, and now proceed to the
Administer Settings
menu with its four
submenus (see screenshot).
When you confirm Save current settings
via OK, you see the name of the setting
saved last, or No Name if nothing was
saved. Confirm via OK, and you are shown a
list of all the saved settings and the option of
entering a new name. Select New Name and
enter a name using the combination keypad.
Save the new name (2 x OK) and you are
returned to the Administer Settings menu.
The HMG automatically assigns a
consecutive number, which can be
subsequently changed by you as needed.
The HMG automatically assigns the next
higher unused consecutive number, which is
always unique. Any gaps in the list of
numbers are not filled.