HYDAC HMG 3000 - Manual (Page 62)

HMG 3000 Page 62
Edition 11/2007 - V02 R01-S02 Stock no.: 669712
6.2.3 Deleting Recordings
Any recording can be deleted when no
longer needed. To do this, select Delete
recording
in the Recording menu + OK:
you are now shown a list of all the stored
recordings. Now select the recording to be
deleted. A small arrowhead to the left of the
file name shows you what you have
selected.
Before selecting a recording, you can sort
the list by
• Name
• Number
• Recording started
and in ascending (
↑) or descending order
( ↓) in each case.
Hit Esc to change from the recording list into
the menu the next level up. The arrow key
(
↑) enables you to access the header row.
Press OK to sort the list according to Name,
Number
or Recording started. To do this,
select Name, Number or Recording started
in the header row using the arrow keys. To
sort in ascending or descending order, click
in the respective column header via OK
(pressing OK more than once causes sorting
to be done in the reverse order). An arrow
next to the column header indicates whether
sorting is in ascending (
↑ ) or descending ( ↓)
order. To return to the selection list, press
(
↓) + OK. Select the measurement to be
deleted and confirm via OK. Several
recordings can be selected in one go by
simultaneously pressing the Shift key.
Confirm via OK, you now have access to the
Delete
function. Hit OK again and the
selected recordings are deleted.
Note:
You are not prompted to confirm the
delete operation.