HYDAC HMG 3000 - Manual (Page 50)

HMG 3000 Page 50
Edition 11/2007 - V02 R01-S02 Stock no.: 669712
The Comment item enables you to enter a
text, e.g. a description indicating the
operational status of the unit or facility while
the recording was being made. The HMG
saves the measurement settings together
with each recording so that a detailed
measurement log is created.
Note:
For the same example, if you select automatic measurement Activated and start the
measurement with Start, you are asked to allocate a Name and a Number to the
measurement. The measurement is then stored under this name with the next consecutive
number. In the function bar on the screen you also see the Autostop function. The
measurement currently running can be discontinued by selecting Stop. This causes the
measurement to be saved and a new measurement to start automatically. To discontinue
automatic measurement, select Autostop followed by OK. The measurement that was just
running is resumed and can be ended again by selecting Stop.