HYDAC HMG 3000 - Manual (Page 60)

HMG 3000 Page 60
Edition 11/2007 - V02 R01-S02 Stock no.: 669712
Table
Tables are useful for displaying individual
measured values. Select Table (+ OK) in the
function bar to select a stored recording
shown and have its values displayed.
For a simple measurement curve recording
you are shown a measured values table
listing the measured values of the active
channels in columns and the associated
recording time in rows. No Min/Max values
are shown here as they are not captured
while recording the measurement curve.
If, however, you select the measurement of
an event log, the measured values table
looks like this:
A complete data record is shown per row for
each event. Each individual data record
consists of the date, time, trigger event and
the associated measured values of the
individual channels including the Min and
Max values. The data record of the event
recorded last
is contained in the lowermost
line of the table.
When more than one channel is used, the
tables of measurements in general, and
event logs in particular, feature a series of
columns and rows which don't become
visible until the respective scroll bar is
moved. Use the arrow keys of the 5-way
navkey to select the arrows next to the
scroll bar. After confirming via OK, you can
scroll in the table up/down and left/right. A
single arrow means scrolling line by
line or column by column, a double arrow
means screen by screen, and
means "jump to the beginning or end of the
table".