HYDAC HMG 3000 - Manual (Page 58)

HMG 3000 Page 58
Edition 11/2007 - V02 R01-S02 Stock no.: 669712
In the list of channels, select a channel to
the right next to the box, and confirm via OK.
In the next menu you see an overview of the
measurement range,
current scaling
(upper and lower limit) of the y-axis, line
style
and colour in which the measured
values of this sensor is shown. You can
reset all the parameter settings except for
the measurement range.
The default scaling (upper and lower limit)
can be manually changed here via the
keypad. This is one of the various options
offered by the HMG 3000 to enlarge
interesting parts of graphs so they can be
explored. After confirming the Lower limit
line via OK, you can change the value.
Conclude your entry via OK. You are now in
the next line. Follow the same steps here to
specify another upper limit, if necessary.
For Line style a drop-down list appears
offering you a choice of Solid line, Dotted
line
, and Dotted and solid. Make your
selection, followed by confirming via OK.
Colour:
use the arrow keys to select various
colours from a list (followed by confirming via
OK
). This enables the rendering of every
channel to be adapted according to your
preferences.
Back
takes you back to the list containing
the measurement channels. The Time
range
is shown above the function bar; it
can also be adapted manually as needed.
Select a value and enter another time
period of interest to you via the keypad (+
OK
).
After selecting Graph in the function bar,
press OK to return back to the graph.