Lenze I/O system 1000 System Manual - Manual (Page 231)

Product description
Power supply modules
I/O supply − EPM−S701
3
l
231 EDSIO1000 EN 7.0
Terminals
Module terminals, spring terminals 2
View Designation Explanation Terminal data
2 6
3 7
4 8
1 5 1 5
4 8
1 Not assigned
10 mm
0.08 ... 1.5 mm²
(AWG 28 ... 16)
2 I/O supply +24 V DC
3 I/O supply 0 V
4 Not assigned
5 Not assigned
6 I/O supply +24 V DC
7 I/O supply 0 V
SLIO002 8 Not assigned
)
Note!
ƒ Terminals 2 and 6 as well as 3 and 7 are bridged internally. Please note that
the max. permissible bridge current is 5 A.
ƒ Both the I/O supply and the electronic supply are protected against overload
internally by a fuse. When the fuses have been tripped, the main supply of
the bus coupler (EPM−S700) must be replaced (
¶ 726).
Technical data
EPM−S701: Rated data
Module identifier −
Electrical data
Input (supply)
Rated voltage DC 24 V
Voltage range DC 20.4 ... 28.8 V
Output
I/O supply DC 24 V, max. 7 A (if UL conformity is required, max. 10 A)
Status, alarm, diagnostics
Status display Yes
Alarms No
Process alarm No
Diagnostic alarm No
Diagnostic function No
Diagnostic information can be read out No
Module status display Green LED
Module error display Red LED