Lenze I/O system 1000 System Manual - Manual (Page 672)

PROFINET communication
Parameterising the counter
Two counters 32 bits, 24 V DC − EPM−S601
12
l
672 EDSIO1000 EN 7.0
Lenze Description/value Name Data set Lenze Description/value Name
Byte No.
81
h
0...3 Set value counter 1 Counting method:
0x3111: byte 3 (high byte)
0x3112: byte 2
0x3113: byte 1
0x3114: byte 0 (low byte) 00
h
4...7 Final value counter 1 Counting method:
0x310D: byte 3 (high byte)
0x310E: byte 2
0x310F: byte 1
0x3110: byte 0 (low byte) 00
h
8...11 Loading value
counter 1
Counting method:
0x3109: byte 3 (high byte)
0x310A: byte 2
0x310B: byte 1
0x310C: byte 0 (low byte) 00
h
12 Hysteresis counter 1 The hysteresis for instance serves to avoid frequent
switching operations of the output and/or triggering of
the alarm when the count value is within the range of the
comparison value. For the hysteresis you can select a
range between 0 and 255. With the settings 0 and 1 the
hysteresis is switched off.
The hysteresis has an effect on the zero crossing,
comparison, overflow/underflow. 00
h
13 Reserved
82
h
0 Alarm response
counter 2 See counter 1 00
h
1 Counter function
counter 2 See counter 1 00
h
2 Comparator
counter 2 See counter 1 00
h
3 Signal evaluation
counter 2 See counter 1 00
h
83
h
0...3 Set value counter 2 See counter 1 00
h
4...7 Final value counter 2 See counter 1 00
h
8...11 Loading value
counter 2
See counter 1 00
h
12 Hysteresis counter 2 See counter 1 00
h