Lenze E70ACxS Application Sample i700 (PLC Designer v3) - Manual (Page 21)

Lenze · Servo Inverter i700 | Application Sample · DMS 1.0 EN - 09/2012 - TD11
21
Opening the Application Sample
Simulation
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6.5 Simulation

How to deactivate the "Watchdog" monitoring:
1. Double-click the A90_Resources folder in the device view.
• Double-click Task Configuration MainTask .
2. On the Configuration tab, deactivate the Watchdog by removing the checkmark ;:

Note!
"Watchdog" monitoring must be deactivated for all tasks before the simulation
mode can be used with the Application Sample.
• If the "Watchdog" monitoring is active, an error message will be issued and
the simulation mode cannot be activated.