Lenze E70ACxS Application Sample i700 (PLC Designer v3) - Manual (Page 3)

Lenze · Servo Inverter i700 | Application Sample · DMS 1.0 EN - 09/2012 - TD11
3
About this documentation
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1 About this documentation
This documentation describes the sample project for the i700 servo inverter for commissioning a
Lenze automation system. The used automation system consists of a PLC for "Controller-based
Automation" and drive components connected (via a bus system).
The explanation of the procedure includes the installation of the integrated development
environment, the »PLC Designer«, and the diagnostics of the application.

Tip!
Information and tools regarding the Lenze products can be found in the download area at:
http://www.Lenze.com
This manual is part of the Controller-based Automation manual collection. The manual collection
consists of the following parts:

Read the Mounting Instructions accompanying the controller first before you
start working!
The mounting instructions contain safety instructions that must be observed!

Note!
This documentation supplements the software manuals of the »PLC Designer« and »PLC
Designer«.
Documentation Subject
System manuals • Controller-based Automation - System structure & configuration
• Visualisation - System structure & configuration
(Software) manual • Controller - Parameter setting & configuration
Communication manuals • Controller-based Automation EtherCAT - Commissioning & configuration
• Controller-based Automation CANopen - Commissioning & configuration
• Controller-based Automation PROFIBUS - Commissioning & configuration
Further software manuals • »PLC Designer«
• »Engineer«
• »Global Drive Control« (»GDC«)
• L-force Controller as gateway - Parameter setting & configuration
• »VisiWinNET® Smart«
• »Backup & Restore«

Information on the use of the controller beyond the field of "Controller-based
Automation" can be found in the system manuals tailored to the application
case.