MTS Landmark TWX - Manual (Page 118)

Review Tab and Example Procedure Overview
After a test run finishes, test results are automatically shown on the Review tab of the main display. You
can use controls in the Review tab to:
• Configure displays to view data for individual or multiple test runs.
• Compare test runs to one another.
• Perform “what if” scenarios by adjusting variable values and recalculating results.
• Generate reports.
• Export raw data.
About the Example Analysis Procedure
The Analysis Procedure in this section directs you to perform selected tasks on existing test run data
provided with the Example MTS EM Tension (Simplified) Test included with your system. MTS provides
data for five test runs for you to learn about the Review tab. For a detailed description of all available
review tab functionality, consult the TW Elite User Guide.
Example Analysis Procedure Overview
1. If necessary, open TWX.
2. Open the example test.
3. Compare valid test runs.
4. Tag invalid test runs.
5. Set up autotag.
6. Select and order data fields shown in the results panel.
7. Show additional statistical data and reorder as desired.
8. Add and configure views.
9. Adjust a variable and recalculate.
10. Save the current display configuration.
11. Switch between display configurations.
12. Generate a report for selected test runs.
13. Generate a report for all test runs.
14. Copy and paste data into another application.
15. Export raw data.
Example Analysis Procedure
1. If necessary, open the TWX application by selecting All Programs > MTS TestSuite > TW Express.
118 | MTS Landmark Test System Operation
Reviewing, Analyzing, and Reporting Data