MTS Landmark TWX - Manual (Page 98)

Click the minimize button in the upper right corner of the Station Manager application.
3. Verify that the Station Manager application is still running by checking for it in the task bar.
You can maximize Station Manager at any time by clicking the Station Manager button in the task bar.
Run the Example Tension Test
Running this Example Tension test consists of the following steps:
a) Open the TWX Application (p. 98)
b) Select the Test (p. 100)
c) Switch to Round Specimen Geometry (p. 100)
d) If Necessary, Correct Any Resource Errors (p. 101)
e) Run the Test (p. 103)
f) Review the Results (p. 104)
g) Save the Test and Minimize TWX (p. 104)
Open the TWX Application
1. Ensure that the HSM (hydraulic service manifold) in the Station Manager application is off.
98 | MTS Landmark Test System Operation
Running the Example Tension Test