MTS Landmark TWX - Manual (Page 66)

The controller power switch is located on the back of the controller.
Open the Station Manager Application
1. Close any open applications on the computer desktop.
This prevents possible confusion from having multiple stations open.
2. Select All Programs > MTS 793 Software > Station Manager. This launches communication between
the computer and the MTS controller.
3. If necessary, select a project.
It is common practice to keep all files in Project1. If you find this acceptable, at the Select Project
window, select Project1. Otherwise enter your own project name for the project.
Note: The Select Project window will not appear if you selected Project1 as the default project
when you installed the MTS TestSuite application.
4. If necessary, select a controller.
In the Controller Selection window, select the controller for the station that you are using.
66 | MTS Landmark Test System Operation
Running the Example Tension Test