Weidmuller WI-I/O-EX: Wireless I/O Expansion Modules v1.11 User Manual
Page 18
Advertising
WI-I/O-EX Serial I/O Module
User Manual v1.11
Page 18
February 2010
2.2.4.1 Current Output
Current output mode may be configured for current source or current sink. Figure 2-11
shows the connections for current source mode. Figure 2-12 shows the connections for
current sink.
Figure 2-11: Connection for current source output.
Note:
-
The module is configured at the factory for this type of output connection
-
To change the input configuration, refer to section 4.5
Figure 2-12: Connection for current sink output.
V-
AOT1
AOT2
AGND
WI-I/O-EX-1-S-13 Module
ALS +24V
PLC
AI+
AI-
V-
AOT1
AOT2
AGND
WI-I/O-EX-1-S-13 Module
ALS +24V
PLC
AI
COM
+
-
+
-
Advertising