Weidmuller WI-I/O-EX: Wireless I/O Expansion Modules v1.11 - Manual (Page 19)

WI-I/O-EX Serial I/O Module User Manual v1.11
WI-IO-EX Manual v1.11 Page 19
Note:
- The hardware configuration needs to be changed for this type of output
connection
- To change the hardware configuration, refer to section 4.5
2.2.4.2 Voltage Output
Voltage output mode produces a voltage referenced to the module’s AGND. Figure 2-13
shows the connection for voltage output configuration.
Figure 2-13: Connection for voltage output configuration.
V-
AOT1
AOT2
AGND
WI-I/O-EX-1-S-13 Module
ALS +24V
PLC
VOLTAGE
INPUT
AI
COM
+
-