Rockwell Automation 1492-PLTKIT Plotter Kit - User Manual - Manual (Page 16)

1-10 Marking System Description
1. Line up the number on the inlay with the notched locator on the base
plate.
2. Slide right side of marker card under ledge on plotter plate.
3. Line-up first notch on the left side of the marker card to the notch on
the plotter plate.
4. Press the left side on the marker card down on to the plotter plates. For
plotter plates with the adhesive strip, refer to Adhesive Strip Preparation
on page A-1.
Installing Inlay onto Plate
Installing Marker Card onto Plate
Table 1.D Inlay Spacer Requirement Using Special Plate, 1492-PLOTPLTA
Marker Card Inlay
1492-MW5-21 Inlay needed
1492-MW6-21 No inlay needed
1492-MW7-21 No inlay needed