Rockwell Automation 1492-PLTKIT Plotter Kit - User Manual - Manual (Page 2)

Important User Information
Because of the variety of uses for the products described in this publication, those responsible for the application and use of this control
equipment must satisfy themselves that all necessary steps have been taken to assure that each application and use meets all performance
and safety requirements, including any applicable laws, regulations, codes and standards.
The illustrations, charts, sample programs and layout examples shown in this guide are intended solely for purposes of example. Since there
are many variables and requirements associated with any particular installation, Allen-Bradley does not assume responsibility or liability (to
include intellectual property liability) for actual use based upon the examples shown in this publication.
Allen-Bradley publication SGI-1.1, Safety Guidelines for the Application, Installation and Maintenance of Solid-State Control (available from
your local Allen-Bradley office), describes some important differences between solid-state equipment and electromechanical devices that
should be taken into consideration when applying products such as those described in this publication.
Reproduction of the contents of this copyrighted publication, in whole or part, without written permission of Rockwell Automation, is
prohibited.
Throughout this manual we use notes to make you aware of safety considerations:
Attention statements help you to:
 identify a hazard
 avoid a hazard
 recognize the consequences
Allen-Bradley is a trademark of Rockwell Automation. Windows is a trademark of the Microsoft Corporation.
ATTENTION: Identifies information about practices or
circumstances that can lead to personal injury or death, property
damage or economic loss
IMPORTANT
Identifies information that is critical for successful
application and understanding of the product.