Rockwell Automation 1492-PLTKIT Plotter Kit - User Manual User Manual
Page 28
Advertising
2-12 Initial Setup
Installing the driver for the
1492-PLTKIT Series E within
Windows XP
1. Login into your Computer using an account with administrative rights.
2. Connect the Plotter to your system and switch on the power.
The “Found New Hardware Wizard” starts.
3. Choose “Install from a list or specific location” and then click
“Next”.
4. In the next window, choose “Search for the best driver in these
locations” and check the box “Include this location in the search”,
click on “Browse” and select the subfolder “XP” in the folder
“Psetup” on your installation CD. Confirm with “OK” and then with
“Next”.
Advertising