Rockwell Automation 1492-PLTKIT Plotter Kit - User Manual - Manual (Page 43)

Initial Setup 2-27
Plotting 1. To plot a card, fill out the card as desired and go to File→ Print
2. Click “Print.” The following window will appear:
3. Verify that the inlay is in the correct position (a), that the card is on the
right frame (b), and that the correct pen is selected (c). If they are all
correct, click “Continue Plotting”
Note: Pen Selection—Select the pen that is to be used in the plotter. If
“No Pen” is selected, an external pen (i.e. a Sharpie) can be
used that is not returned to the pen holder.
Plotting Multiple Cards
Multiples of the same card and multiple different cards can both be plotted in
the same print session.
1 2 3 4 5
B. There are five
frames for the cards
A. The inlay position
is indicated by
whichever number
is next to the
red bar (position 2
in this case)