Rockwell Automation 1492-PLTKIT Plotter Kit - User Manual - Manual (Page 53)

Chapter
4
Troubleshooting and Maintenance
Chapter Objectives This chapter describes how to:
 Troubleshoot the marking system
 Perform routine maintenance
 Clean the plotter pens
 Technical Specifications
Using the Troubleshooting
Chart Table 4.A is a troubleshooting chart. This chart lists the most common
operating problems, probable causes, and steps to correct the problem. If you
encounter a problem that is not listed in the table, contact
Rockwell Automation Technical Support at (440) 646-3434,
options: 3, 2, 4, 2, 5.
Required Equipment A voltmeter is required for verifying that the correct voltage is supplied to the
plotter. The voltmeter is also required for verifying the correct
communications cable configuration.