Rockwell Automation 1492-PLTKIT Plotter Kit - User Manual - Manual (Page 17)

Chapter
2
Initial Setup
Chapter Objectives This chapter shows how to:
• Set up the Plotter
• Installing the Plotter Driver
• Activating the Plotter with ClearTools
Setup Location
A dry, dust-free room is the ideal environment for the plotter. If possible, do
not install the device in damp or very dusty areas. Do not expose the system to
direct sunlight. Please ensure the connections on the right-hand side of the
device are accessible all times. Position the plotter firmly on the work surface
where it is to be used, ensuring it is level. Please ensure the writing arm can
move freely and is not obstructed by other objects.
Connections
1. Install the power cord and plug into outlet.
The plotter power supply features a variable AC input voltage of 100 to
240V AC/50...60 Hz. The power connection can be replaced by way of
adapter plugs, as required.
2. Connect the plotter to the computer using the USB cable. The USB port
is located on the right-hand side of the plotter.