Rockwell Automation 1492-PLTKIT Plotter Kit - User Manual - Manual (Page 45)

Initial Setup 2-29
6. Verify that all the inlay positions are correct, and that the desired pen is
selected.
7. Select “Continue Plotting”
Note: If you do not want to print five marker cards, or wish to skip a
frame, deselect the “Use Frame” checkbox located above each
frame. Any frames not selected will not be plotted upon.
Note: When plotting more than five cards in a single plot job, multiple
“Marker Card Fixture” (see above) windows will appear. Select
“Continue Plotting” on the first window, but do not on the second
until the first batch of marker cards are plotted upon and you
have put new marker cards into the frames.
➏
➐