Rockwell Automation 1500 Modular Protection System Conversion Kit (Bulletin 1406 to Bulletin 825 Plus) - Manual (Page 15)

1500-IN058D-EN-E – June 2013
Installation 4-3
Door Cover
1. Disconnect and remove the communication cable from 1406
programming module, located on the low voltage door. (Figure 4.3)
2. Remove the 1406 programming module from the low voltage door.
Save the mounting hardware for use later in the installation process.
(Figure 4.4)
3. Use the saved hardware to mount the 1406 door filler cover supplied
with the conversion kit. Ensure that the correct colored door filler
cover is used. The 825 Plus Conversion Kit contains ANSI 49 and
61 colored door filler covers. (Figures 4.5 and 4.6)
Figure 4.3
Figure 4.4 Figure 4.5 Figure 4.6