Rockwell Automation 1500 Modular Protection System Conversion Kit (Bulletin 1406 to Bulletin 825 Plus) - Manual (Page 19)

1500-IN058D-EN-E – June 2013
Installation 4-7
Re-installing the Low Voltage Door
1. Re-install the low voltage door. Caution must be taken when re-
installing the door. It is recommended that two people remount the
door – one person to hold the door and a second person to replace
the hinge pins. (Figure 4.18)
Ensure sufficient personnel are present to safely
replace the low voltage door. Failure to do so may
result in personal injury and/or damage to the
equipment.
2. Remount all door-mounted devices that were removed.
(Figure 4.19)
Figure 4.18
Figure 4.19
A T T E N T I O N A T T E N T I O N