Rockwell Automation 1500 Modular Protection System Conversion Kit (Bulletin 1406 to Bulletin 825 Plus) - Manual (Page 18)

1500-IN058D-EN-E – June 2013
4- Installation
Preparing Low Voltage Door
for 825 Plus (cont.)
1. Mount the 825 Plus through the low voltage door cutout. Re-
member to place a mounting collar on both sides of the low volt-
age door. (Figure 4.15)
2. Fasten the 825 Plus to the low voltage door using the mounting
hardware provided with the 825 Plus.
Tighten the screws with minimal force. Do not over
tighten.
3. Before completely tightening the mounting hardware ensure the
825 Plus is mounted on a level plane both horizontally and verti-
cally. (Figures 4.16 and 4.17)
Figure 4.15
Figure 4.1 Figure 4.17