Rockwell Automation 1500 Modular Protection System Conversion Kit (Bulletin 1406 to Bulletin 825 Plus) - Manual (Page 6)

1500-IN058D-EN-E – June 2013
1-2 Introduction
The elimination of a disturbance may cause the motor to
start running again by itself. This may endanger persons
or damage equipment. The user must take the necessary
safety measures to protect against this type of occurrence
so that any danger is avoided.
Kit Highlights and Limitations
The Bulletin 1406 to Bulletin 825 Plus Conversion Kit provides most of
the features and functionality of the Bulletin 1406. However, the
Conversion Kit also provides additional features and functions not
provided/supported by the Bulletin 1406.
The Bulletin 825 Plus Conversion Kit provides:
• easy installation
• modular design
• no additional wiring
• uses existing low voltage door and panels (in most cases)
• various communication methods:
Y
– DeviceNet TM X
– Modbus TM X
• (12) RTD inputs with remote RTD Scanner (optional)
• programmable analog output
X Option card required.
Y Does not support interconnection method used by the Bulletin 1406-P and 1406-AA.
Note: The user must validate the control and protection capabilities
of the 825 Plus.
Personnel Safety
Protection of personnel in the vicinity of control equipment is of primary
importance. The corresponding requirements of regulatory agencies are
therefore becoming increasingly severe. The Bulletin 825 Plus reflects this
by providing the following protection:
• Equipment construction: – Touch protection
– Insulated housing
• Motor protective functions: – Earth (ground) fault
– High overload, stalling and jam
– Phase reversal
Overview (cont.)
A T T E N T I O N A T T E N T I O N