Rockwell Automation 1732E-IR4IM12R ArmorBlock Dual-Port EtherNet/IP 4-Point Thermocouple and RTD - Manual (Page 65)

Rockwell Automation Publication 1732E-UM004A-EN-E - July 2012 57
Appendix
A
Specifications
General Specifications The 1732E ArmorBlock Thermocouple and RTD Input Modules have the
following general specifications.
Input Specifications The 1732E-IT4IM12R Thermocouple input module has the following input
specifications.
General Specifications
Attributes Value
Voltage, power, max 30V DC
Voltage, power, min 12V DC
Module power 12…30V DC @ 300 mA
Power consumption 3 W @ 24V DC, typical
3.5 W, max (module unloaded)
Isolation voltage 50V (continuous), Basic Insulation Type
Type tested @ 707V DC for 60 s
Communication rate EtherNet/IP
10/100 Mbps
Full or half-duplex
100 meter per segment
Status indicators Module status – red/green
Network status – red/green
Link status – green/yellow
Auxiliary power status – green
I/O LED – red/green
Dimensions, approx., HxWxD 179 x 37 x 27 mm (7.05 x 1.46 x 1.06 in.)
Weight, approx. 0.34 kg (0.75 lb)
Wiring category
(1)
(1) Use this Conductor Category information for planning conductor routing. Refer to publication
1770-4.1 , Industrial Automation Wiring and Grounding Guidelines.
1 – on signal ports
1 – on power ports
1 – on communication ports
Input Specifications – 1732E-IT4IM12R
Attributes Value
Number of inputs 4, isolated
Resolution, min 16 bits
Data format Signed integer