Rockwell Automation 1732E-IR4IM12R ArmorBlock Dual-Port EtherNet/IP 4-Point Thermocouple and RTD - Manual (Page 71)

Rockwell Automation Publication 1732E-UM004A-EN-E - July 2012 63
Appendix
B
1732E ArmorBlock Embedded Web Server
Introduction Rockwell Automation offers enhanced 1732E ArmorBlock for your EtherNet/IP
control systems so you can monitor data remotely via web pages.
This chapter shows how you can use the module’s web server.
Typical Applications The module provides access to internal and network diagnostics. This access
opens up different, remote access applications to control systems. Use the
ArmorBlock I/O web browser to remotely access module data. Use a web browser
to monitor live module data and access diagnostic information.
Browser Requirements You can access the 1732E ArmorBlock I/O web pages only with Internet
Explorer 6.0 or higher. To access data view pages, the browser requires Javascript
support.
The supported display size is 640 x 480 or greater. Smaller display sizes work but
might require extensive scrolling to view the information.
Topic Page
Typical Applications 63
Browser Requirements 63
Access the Home Page of the Web Server 64
Log On to the Web Server 64
Navigate the 1732E ArmorBlock I/O 65