Rockwell Automation GV3000/SE AC Drive Ver. 6.06 Hdwe Ref., Installation, and Troubleshooting Manual - Manual (Page 115)

Compliance with Electromagnetic Compatibility Standards C-7
C.4 Wiring Practices
This section describes how the GV3000/SE drive must be wired to conform to the
standards listed in section C.1. Figures C.3 and C.4 show GV3000/SE wiring
configuration examples.
Figure C.3 – Stand-Alone GV3000/SE Wiring Example
1
4
2
3
4
G
MOTOR
AC
Mains
Filter
L1
L2
L3
PE
U,V,W
PE
U,V,W
1
2
3
4
AC line input
Screened 4-wire motor cable
Screened signal conductor cable
(feedback, reference)
EMC-tested armored cable gland at drive
and terminal box
GV3000/SE