Install the driver, Mount the driver on the housing or panel – Rockwell Automation 1442 Eddy Current Probe System User Manual
Page 25
Advertising
Rockwell Automation Publication ICM-UM004C-EN-E - February 2014
25
Installation
Chapter 1
Install the Driver
The driver can be installed on a DIN rail, or it can be mounted on a panel or wall
by using the provided adapter.
Mount the Driver on the Housing or Panel
The driver can be directly mounted on the panel.
Attach the driver to the panel mounting plate and affix with the provided four
screws (M4 x 12 mm).
Terminal Arrangement
TIP
When attaching to panels or mounts, make sure the surface is strong and
flat.
Terminal No.
Signal
1
OUTPUT
2
COM
3
-24 V
4
Shield (COM)
Advertising