Rockwell Automation 1442 Eddy Current Probe System - Manual (Page 31)

Rockwell Automation Publication ICM-UM004C-EN-E - February 2014 31
Installation Chapter 1
1442-PS-18xxE (18 mm English) 1442-PS-1820E0510A 88.2 900 780
1442-PS-25xxM (25 mm metric) 1442-PS-2505M0510A 176 1800 1557
1442-PS-25xxE (25 mm English) 1442-PS-2520E0510A 196 2000 1734
1442-PS-50xxM (50 mm metric) 1442-PS-5005M0010A 176 1800 1557
1442-PS-50xxE (50 mm English) 1442-PS-5020E0010A 196 2000 1734
1442-PR-08xxM (8 mm rev mnt metric) 1442-PR-0803M0505N 8.5 87 75.2
1442-PR-08xxE (8 mm rev mnt English) 1442-PR-0812E0205N 6.8 69 60.2
Table 2 - Torque Requirements
Sensor Example
Tightening Torque
N•m kgf-cm lb•in
ATTENTION: Make sure to tighten the jam nut at the specified torque.
If tightened with excessive torque, the sensor can be damaged. If the
tightening torque is too small, it can come loose.