Antelope Audio Eclipse 384 - Manual (Page 10)

7. Now go to the I/O tab and SRC the source to match the sample rate of your setup.
4.3. Quick Start for A/D Conversion
1. Go to the AD/DA tab.
2. In the A/D Source dropdown menu, select which analog input you want to convert.
3. If you have a device connected to your A/D inserts and don’t want to use it, just click bypass
on the AD Inserts bypass box.
4. Select the clock that will be used for the conversion (The default setting will be Clock A -
Single Clock mode).
1
11