Antelope Audio Eclipse 384 - Manual (Page 9)

3. Select your digital source in the monitor source dropdown menu.
4. Go to the Clock tab and under the Source dropdown menu, select Follow Monitor. This
way the Eclipse 384 will be locked to the incoming digital signal. Keep in mind that if you
have USB selected as a source, the clock source will state: Follow Monitor: Oven, and you
will have to manually select the sample rate in order to match it with the one of your USB
device.
5. Wait for the Lock Light to illuminate.
6. In the Clock A section, select Follow Source, if you just want to listen to the source. If your
setup is working in a different sample rate than the one of your source, then choose the
sample rate of your set up on the Clock A dropdown menu.
1
10