Antelope Audio Eclipse 384 - Manual (Page 7)

4. Quick Start
It only takes a few moments to harness the benefits of the Eclipse 384 sound.
Follow these simple steps to connect the Eclipse 384 to your system setup:
1. Connect to the AC power source via AC Mains Outlet.
2. Connect your USB cable to the Eclipse 384 and your computer. The guest operating system
will recognize the new output audio device (Eclipse 384). You should redirect sound from
the computer to your newly indicated output – Eclipse 384.
Mac OS:
In your Apple Menu, go to System Preferences and choose Sound, Select the Output
tab and select Eclipse 384 from the list.
Windows:
Click on your PC’s START menu, then select:
SETTINGS / CONTROL PANEL / SOUNDS & AUDIO DEVICES / AUDIO and ensure that
the Eclipse 384 is selected as default audio device.
3. Download and install the software control panel from the Antelope Audio website.
4. Install the latest firmware update for your device by clicking on the firmware update button
on the preferences tab (of the software control panel).
5. Connect your choice of Analog/Digital Inputs and Outputs on the rear panel of the device.
6. Turn on the device by pressing the power button on the front panel or in the software control
panel.
7. Adjust your Inputs/Outputs’ Trim levels on the I/O section of the software control panel.
1
8