Antelope Audio Eclipse 384 - Manual (Page 28)

Follow Monitor: The Eclipse 384 syncs to the digital input that feeds the current monitor being
used. (Note that if you choose an analog input or the A/D, the Eclipse 384 will be automatically
locked to the system clock.
Follow Digital Out: The Eclipse 384 syncs to the selected source that feeds the De-Jittered digital
outputs.
2. Clock A/B Sample-rate:
Set the sampling rate used by the corresponding clock (A or B). Sample rates can go up to 384kHz.
3. Varispeed:
You can adjust varispeed up/down to 12,256% or -+ 200 cents.
4. -/+ Options:
Options of -+ 4% or -+0,1%
5. Sampling Rate Display:
Displays the current sample rate used by the corresponding clock
6. Atomic Indicator:
When this light is lit, the device is receiving timing reference from an Atomic Clock (Such as the
Antelope 10M).
7. Oven Indicator:
When lit, this indicates that the device is the master clock.
8. Lock Indicator:
When lit, this shows that the device is locked to a signal.
9. WC Outputs:
You can select which clock will be fed on which individual WC output. Note that in single clock mode
(factory setting), you cannot adjust this option and Clock A clocks all the outputs.
2
29