Antelope Audio Eclipse 384 - Manual (Page 25)

1. A/D Source:
By clicking on the source tab of the A/D Converter, you select which analog Input will feed the A/D
converter directly. The result will be fed to the main A/D output on the rear panel of the Eclipse 384.
2. A/D Options:
Bypass Inserts: Bypasses the A/D Inserts in/outs on the rear panel of the Eclipse 384
3. Select Clock:
Select one of the two clocks that will be used for the A/D Conversion of the selected input. (Note that
this option is available only when the dual clock mode is selected on the preferences tab).
4. D/A Source:
Select the input that will be fed directly to the D/A Converter output on the rear panel
5. D/A Options:
Mute: Mutes the D/A Output
OSC: Enables the oscillator on the D/A Output
6. D/A Fader:
Adjusts the output volume level of the D/A Output
2
26